|
SAW SAW
Plug-Ins SAMM SAC BobsTerm
Pro WordSense
The
Frequency
Analyzer provides a powerful new way to look at the frequency
content of audio material in real-time, as it plays in the SAWStudio
MultiTrack. You may patch the analyzer into any input track
to view individual signals, or into any output track, where
you can see the combined mix of multiple signals, or still see
any individual signal by using the solo buttons on the virtual
console.
The
Analyzer has a powerful interface that displays 50 individual
bands of hi-resolution frequency filters. The meters respond
in exact real-time and the response decay rate may be adjusted
to four different speeds.
Back
to top
The
SAWStudio
Levelizer Plug-In module is a professional quality dynamics
processing and mastering tool that offers enhanced Gate, Compressor
and Peak Limiter/Normalizer functions to the SAWStudio user.
This module also offers accurate Gain Reduction Metering of
all combined functions, a Remove Silence function, and the ability
to scan and display the highest 50 peaks within any range of
MultiTrack audio!
Back to top
This
product was designed by Hristo Doichev, assistant programmer
to Bob, while employed at Innovative Quality Software.
The
Studio Reverb
algorithms used incorporate the same Comb/Allpass filter design
found in many high quality rack mounted reverb devices, but
the Studio Reverb takes this design to the max. You'll have
up to 20 Comb Filters and 20 Allpass Filters, with Hi Frequency
Diffusion control in each Comb Filter feedback path and a high
quality sharp cutoff Bandpass Filter on the overall wet output,
truly rivaling the more expensive rack devices in sonic quality!
Back
to top
This
product was designed by Hristo Doichev, assistant programmer
to Bob, while employed at Innovative Quality Software.
The AVI Viewer plug-in makes
sound editing to video a simple and affordable process in SAW.
The AVI Viewer is assigned to a track of the MultiTrack through
the FX Patch Builder window. The viewer will display multiple
AVI video files to the computer screen without the need for
any additional hardware, or to an external full screen video
monitor with the use of specialized video capture boards. This
video display is dynamically linked to the SAW MultiTrack environment
and will track precisely with all MultiTrack cursor movements
in any SMPTE mode, with sub-frame accuracy. As you move the
MultiTrack cursor, the video display will chase accurately frame
by frame or you may position the video with the viewer's scroll
bars and the MultiTrack cursor will chase frame by frame. The
link works both ways. Placing audio regions in exact sync with
video becomes a simple procedure.
Back
to top
The Aux Send/Return plug-in
adds some extra versatility to the SAW MultiTrack environment.
Properly patched, it can create four Auxiliary Send controls
and four Auxiliary Return controls within the MultiTrack environment.
Multiple tracks of audio data can be sent in any proportion
to one plug-in effects module (the Reverberator, for example),
instead of individually patching the same effect on each track,
minimizing the CPU processing load. You may also use the Send/Return
module to truly emulate the Pre/Post function of a normal mixing
console, or otherwise use it as a virtual mixing bus.
Back
to top
The Smpte Machine plug-in launches
the SAW user into the world of SMPTE and MTC sync in a grand
fashion! This module can generate phase accurate LTC SMPTEcode
through any sound card audio output, in perfect sync with the
sound card clock, no drift possible, with no additional MIDI
or SMPTE hardware devices necessary. A multi-channel sound card
guarantees perfect lock. It can also generate MTC MIDI code
though any MIDI hardware port. It can also read LTC SMPTE code
through any sound card audio input and trigger SAW Playback,
Record or Simultaneous Record/Play operations within an average
30 sample accuracy on the Windows NT platform. This is less
than one millisecond, which equates to less than 1/30 of a SMPTE
frame. Again no additional MIDI devices are necessary!
Back to
top
The MeterBridge plug-in enhances
your SAW environment with beautiful visual displays of individual
or multiple track playback volume reference meters. The meters
can be assigned to any track, including output tracks, giving
you a live/real-time LED or VU meter display of your multitrack
session. The displays can be mixed (LED/VU), labeled, and positioned
anywhere, and all information is retained with your EDL. Now
you can easily see levels anywhere within your session by simply
placing your MultiTrack cursor and playing back. Placing meters
on the output track lets you easily adjust your output offset
volume to keep your mix below clipping. Meters retain the highest
margin hit during playback, even after playback ends, for a
quick visual reference of your overall mix level.
Back
to top
|
